آشکارساز شعله جمع و جور از CFC 200 برای نظارت بر شعله های گاز و روغن در کوره های منفرد تک ساخته شده است.

Spectral sensitivity
CFC 200 UV 1 (formerly 8.0) 190-550 nm
CFC 200 UV (formerly 8:30) 280-420 nm
CFC 200 IR (formerly 8:40) 300-1050 nm
CFC 200 IR3 (formerly 8.70) 1050-2700 nm
Opening angle 2.7 °
Power supply 24 V DC
Current consumption 200 mA
Construction according to SELV III
Ambient temperature -20°C … + 70°C
Current output 0 (4) … 20 mA (Ra <250 Ohm)
Flame relay
1 change-over contact, potential-free
VDE 0110, Class A
max. 48 V switching voltage
max. 1 A Switching power (fused with 0.5 A)
max. 30 W switching power
Switching point “flame ON” 5 (8) mA
Switching point “flame OFF” <5 (8) mA
Safety switch-off time is factory set at 1s
Other disconnection on request
Sighting tube connection 1 “female thread ISO 228
Purging air 1/2 “internal thread to ISO 228
Air flow 10 m3 / h at standard conditions

Elektrical Connection

standard Harting connectors HAN8 90 °
Ex enclosures 3m firmly connected cable
OE converter Harting connectors HAN8 90 °
EX-OE converter M20 gland and terminals in the interior

Housing Dimensions

Standard with flange 235 x 108 mm (length x diameter)
Ex enclosures 223 x 120 mm (length x diameter)
OE converter housing 120 x 122 x 80 mm (length x width x height)
Ex-OE converter housing 232 x 232 x 166.5 mm (length x width x height) *
3-Ex-OE Wandlergeh. 276 x 276 x 218 mm (length x width x height)
(without connectors and mounting bracket)

Schutzart

Standard housing and OE converter housing IP 65,
comparable to NEMA 4 / Class 1 Div. 2
ATEX Zone 2, II 3G Ex nA IIC T4 Gc X
Ex-housing IP 66, comparable with NEMA4 / Class 1 Div. 1
ATEX Zone 1 (see declaration of conformity of housing manufacturer)
Ex-OE converter housing
ATEX Zone 1 (see declaration of conformity of housing manufacturer)

Gewicht

Standard 1.5 kg
Ex-housing 4.0 kg
OE converter housing 1.5 kg
Ex-OE converter housing, 1x 7.0 kg
Ex-OE converter housing, 3x 13.0 kg.